By Frank Huber
Here are the project pictures I said I would send. I am very happy with the Scroll Table since it gives me a stable platform to work on. The All-Purpose Foam Coat works great. First I applied a lighter coat to stick to the foam and then followed up with a heavier coat with a few drops of acrylic paint to give it some color. Since I was going to put this in a fish tank, I seal-coated everything with spray clear urethane. Since my application of the Foam Coat was not as perfect as I had hoped my first application of urethane caused the foam to melt away under the Foam Coat. For my redo, I used two coats of a latex primer over the foam. The Foam Coat adhered well to the primer. Thanks for the products – they worked very well!