With enough help and the right information, you can shape your VBS experience into anything you want. Browse through the variety of scenes and props below for information and inspiration, then start creating!
Themes & Designs
Made from 2″ inch thick sheets of EPS Styrofoam and duct tape!
Antique wardrobe, secret passage, and performance platform!
A space themed backdrop that’s out of this world!
Realistic Stone walls, giant tablets, letters and more!
A rocky mountain experience!
A fun bakery and candy shop!
2D shapes with shadowed and cut-out animals!
Ahoy matey! Weigh anchor and hoist the mizzen!
Lifesize tomb & realistic fireplace!
Props & More!
Joseph and the colorful coat!
Made in 2 hours!
A collection of easy-to-make props!
Tools of the Trade
These are just some of the supplies used in the projects above. For more tools of the trade, visit www.HotWireFoamFactory.com.
More tool information:
Industrial Hot Knife
Unlike other lower-quality models (with the same price tag) our new 6″ Industrial Hot Knife can be used continuously for periods of up to 45 minutes, and much longer if turned off between cuts. It is lightweight, solid state (the power supply is right in the handle), has a replaceable 6″ blade, variable heat settings, and a 10 foot power cord. Used by professionals for everything from art installations to cutting SIP and ICF construction panels.
Make the Blade Into Any Shape!
Comes with 5 ultra-stiff, yet shapeable 10.5″ wires that bolt onto the arms. Scoop out big or tiny pieces of foam for any level of control. The Freehand Router is to foam what the chisel was to stone.
Our Foam Fusion is the ultimate EPS foam glue! It permeates the foam and bonds around its cells. Other glues containing solvents will dissolve foam over time, but our formula is solvent-free. Our glue is not affected by heat or cold as with glue guns. It works with most rigid foams including Styrofoam, and many soft foams. Foam Fusion bonds foam to almost any porous surface and is easy to apply – simply brush on. Plus, Hot Wire Foam Factory tools will cut through this glue.
All Purpose Foam Coat
Protects and Beautifies! This is our all purpose and exterior foam coat. For smoothing and hardening foam surfaces. Comes in a dry powder – simply mix with water. 3 pounds covers up to 30 square feet. 25 pounds covers up to 250 square feet. Dollar-for-dollar, our Foam Coat covers 4x as much as Rosco Foam Coat, and has a longer shelf life. Use All Purpose foam coat for all your indoor creations, use exterior for a cement like mixture that’s perfect for the home and garden!